IOTA DLS-27-25 Amp Battery Charger
Seeking to honor the Lord Jesus Christ in all our business dealings since 1998
 Division of Lighthouse Enterprises

Let us help you find the right charger for your application

WARNING!!
Do you REALLY need a new charger? Trying to charge dead batteries will not work!
There has to be a minimum voltage in the batteries or the charger will not work!
Older Lester chargers need about 70% of normal charge
 
and the newer chargers made beginning in 2004 need to sense only 5 volts
Quick Charge on board chargers need 50%
Quick Charge portables need 10 volts

 NEW SUMMIT II Chargers require 12 volts to work!

 

Home | Shipping & Returns | About Us | Contact Us |

 

Home
Up
Daily Success is Possible
Lester Summit II Battery Chargers
Lester Charger Parts
Lester Battery Chargers
Taylor-Dunn Chargers
Yamaha Chargers
PBM Battery Chargers
Quick Charge Battery Chargers
ChargePlus Battery Chargers
DPI Chargers, Inverters and Converters
PowerMAX Converters and Chargers
Pro Charging Systems - Dual Pro Chargers
Canada Shipping and other Countries
Solution Graphics

DLS-27-25
25 AMP POWER SUPPLY/CHARGER FOR 24VDC

INPUT VOLTAGE
108-132 VAC
INPUT FREQUENCY
50-60 Hz
OUTPUT VOLTAGE
27.2 VDC
OUTPUT AMPERAGE
25 Amps
DLS-27-25 Battery Charger/Power Converter

Only $269.99 plus actual shipping.    


Only $299.99 w/IQ4 plus actual shipping.    

  DESCRIPTION
The DLS-27-25 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 24VDC load up to 25 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-27-25 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells. 

 
  MODELS
DLS-27-25 Battery Charger/Power Converter DLS-27-25
The DLS-27-25 provides AC/DC conversion up to 25 amps and features a Dual Voltage Jack, allowing the user to manually select between a nominal charging voltage of 27.2 or a stepped-up charging voltage for faster battery charging.

DLS-27-25/IQ4
The DLS-27-25/IQ4 features an internal IQ Smart Charge Controller which automatically provides three-stage battery charging for safer charging and longer life for your system's battery.


 
  SPECIFICATIONS
DC Output Voltage (No Load) approx. 27.2V (DC)
Output Voltage Tolerance (No Load) + or - .5%
Output Amperage, Max Continuous 25 Amps
Output Voltage (Full Load) approx. >27.0V (DC)
Maximum Power Output, Continuous 675 Watts
Ripple and Noise <50 mV rms
Input Voltage Range 108-132V (AC)
Input Voltage Frequency 47-63
Maximum AC Current @ 108VAC 12 Amps
Typical Efficiency >80%
Max Inrush Current, Single Cycle 40 Amps  
Short Circuit Protection Yes
Overload Protection >100%
Line Regulation 100 mV rms
Load Regulation <1%
Fan Control Proportional
Thermal Protection YES
Working Temperature Range 0-40C
Storage Temperature -20 to 80C
Withstand Voltage 1240V @ leads
Dimensions 9.7" x 6.7" x 3.4"
Weight 5.0 lbs

 

 
Copyright 1998-2025, Lighthouse Enterprises      Privacy Policy    About Us  Contact Us    Shipping and Returns
  Prices are subject to change without notice due to errors on our part or price increases!
www.CentralVacuumMotor.com, www.CartPartsRUS.com, www.FloorScrubberPartsDepot.com
 www.FloorSweeperPartsDepot.com, www.LiftPartRUS.com, www.LighthouseEnterprises.us